calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of Must be applied at a rate of 1.5m2/L in total (equivalent to two coats at 3.0m2/L per coat) to achieve an effective moisture barrier.
Required:
34 Lr
3d
Application Model
specs
Technical Specifications.
Waterproof Time:
Coverage:
Must be applied at a rate of 1.5m2/L in total (equivalent to two coats at 3.0m2/L per coat) to achieve an effective moisture barrier.
Usable period
after opening:
2 Hours
Touch dry time,
minimum:
Vapor Pressure
@ 25oC:
26g/L.
Application
Temperature:
10°C-26°C
Shelf Life:
24 months
Membrane
Classification:
N/A
Colour:
Grey; Semi-Gloss progressing to matt over time
Tack Free Time:
4 hours at 25°C and 50% R.H.
Recoat Time:
24hrs after final coat@ 25 ̊C and 50% R.H. (longer in confined areas)
Elongation
at Break:
Recommended
Thickness:
0.3mm single coat application; 0.6mm for 2 coat applicatios
Chemical
Resistant:
Pass
Full Cure:
7 days at 25°C and 50% R.H.
Chemical
Base:
Water-based
Cure Mechanism:
Tear Propagation
Resistance:
Service
Temperature:
-10°C to +65°C
Solid
Contents:
44%
Bond Strength:
Density:
Compressive
Strength:
Flow:
epoxy primer
ACTFLEX EP-250: PRIMER / SEALER / COATING / MEMBRANE SYSTEM WATER BASED 2 PACK EPOXY
ACTFLEX EP 250 serves as both a priming and sealing agent for concrete, masonry, and other cementitious surfaces, providing a robust hydrostatic damp-proofing barrier. Its versatile formulation makes it ideal for preparing moisture-sensitive coatings and acts as a reliable moisture barrier for negative side surfaces. Key advantages include its non-flammability, low odor emissions, and compatibility with freshly cured green concrete. Additionally, it strengthens and stabilizes degraded or dusty concrete substrates, enhancing structural integrity and extending the life of the applied surfaces.
Available in (sizes)
4 Lr / 20 Lr
ACTFLEX EP 250 is a two-part water-based epoxy polyamide coating that acts as a highly effective moisture barrier. It is specifically designed to resist water infiltration, prevent rising damp, control efflorescence, and withstand hydrostatic pressure. This versatile coating offers comprehensive protection across various applications. Additionally, ACTFLEX EP 250 is approved for use with potable water, having been independently tested and certified to meet the requirements of AS4020:2005 and SS375-2001 standards.